Plaster Repair
Loose or cracked plaster reattached to its lath and skimmed flat, or plaster and lath taken out and replaced with drywall where it has failed.
South Bend Drywall Pros carries out drywall repair and installation in North Liberty, IN, including drywall installation, repair and finishing in North Liberty for the prewar houses, their additions and the newer homes around them.
Request a quote
Tell us about the job and we will call you back to talk it through.
An older North Liberty house may have grown a room or two since it was built. Where a plaster wall meets the drywall of a later addition, the two materials move differently, and a crack follows the joint. Fresh compound will not hold there. We cut along the joint, add reinforcement or a flexible bead, and finish it so the seam can move without opening up.


Close to four homes in ten here date from 1939 or earlier. So a cracked wall is often plaster on wood strips. Loose sections get fastened back with plaster washers. Where the plaster has crumbled, we cut back to sound edges and fill with board shimmed to the same thickness. That way the trim still fits.

About a fifth of the town's homes went up in the 1950s and 1960s, when drywall was usually nailed, not screwed. As the framing ages, the nail heads push out. They show as small round bumps. We drive a screw beside each one, set the nail and spot the area with mud.
If a job needs a permit, the town comes first. North Liberty approves the work and issues an Improvement Location Permit. Then the county’s building department issues the building permit and does the inspections. Every drywall contractor working here also registers with the county, with a bond and a fee. The county’s fee schedule covers repairs and remodeling, not just new work. And work started without a permit pays triple fees. So the paperwork gets sorted first.
An older basement may be block or stone, and those walls can stay damp. Paper-faced board touching a damp wall grows mold. So we frame a little off the foundation, use mold-resistant board and stop it above the floor. Water coming in after heavy rain gets fixed before any wall goes up.
North Liberty is one of the closest towns we serve, about 15 road miles south of South Bend, roughly half an hour. So we can come out for a single hole. Or come back the next morning for a second coat, without waiting on other jobs nearby.
We also serve New Buffalo, MI, on Lake Michigan, where many homes stand empty in winter.
North Liberty has a population of about 1,632. Here is what that means for the work we do here.
| Local fact | Detail |
|---|---|
| Homes built 1939 or earlier | 38% of housing, the largest single share by age. |
| Detached houses | 89.3% of homes are single-family detached; 78.1% are owner-occupied. |
| Permits | The town issues an Improvement Location Permit first; the county building department then issues the building permit. |
| Contractor registration | Drywall contractors register with St. Joseph County: a notarized form, a $5,000 bond and a $125 fee. |
| Historic district | North Liberty Historic District, on the National Register since 2014, covers the business district. |
Loose or cracked plaster reattached to its lath and skimmed flat, or plaster and lath taken out and replaced with drywall where it has failed.
Cracked, sagging or holed drywall ceilings, winter corner cracks included, repaired down to solid framing and textured to match the rest of the room.
Basement walls framed off the foundation and hung with mold-resistant board kept clear of the slab, with the ceiling planned around what needs reaching.
Wet drywall and stained or sagging ceilings after a burst pipe, roof leak, ice dam or basement flood, cut out and dried before it is rebuilt to match.
New board taped and finished to the level the room needs, a skim to Level 5 where light rakes the wall, and old textures matched or skimmed smooth.
Garages boarded to the Indiana code's separation rules, with Type X overhead wherever a bedroom sits above.
Steel stud partitions and fire-rated walls built to the design on the drawings, with repairs worked around tenants and opening hours.
The two parts often sit on different foundations, and they move by different amounts. A rigid patch cracks again. The joint needs reinforcement, or a control joint that lets it move.
Often. First we check the floor framing, the headroom and the insulation. Then board goes on the knee walls and the sloped ceiling, with the vents above it kept open.
Drywall alone is not a heat shield. The stove's listing sets the clearances. Closer than that, you need a noncombustible shield with an air gap. We hang the board, and the shield goes over it.
Plastic over the doorway with a zipper, sanders hooked to a vacuum, and wet sponging on small patches instead of sanding. We also tape off air returns in the room.
Yes, in the countryside of Liberty Township too. Outside town limits, the county's own rules apply, and we check them first.
Yes. A closet wall is light framing with board on both sides. In a plaster room we cut the new wall in neatly and blend the corners, so it looks original.
Tell us what you are dealing with and we will give you a straight answer on scope, timing and what drives the cost.
Phone is quicker: (574) 406-1764. Otherwise fill this in. Somebody rings you back.